Garrett MT 5500™
MT 5500™ Walk-Through Metal Detector
Operating: -4° F (-20° C) to +122° F (50° C)
Humidity to 95% non condensing
Storage: -40° F (-40° C) to 158° F (70° C)
Fully automatic 100 to 240 VAC, 50 or 60 Hertz, 24 watts; no rewiring, switching or adjustments required.
Weatherproofing / Foreign Object Protection Standards
Meets IP 31, IEC Standard. “Degrees of Protection provided by Enclosures,” IEC 529.
100% sensor coil Faraday shielding; RFI interference reduced with hardware; special Garrett built-in circuitry for noise suppression and ignoring x-ray monitors. Physical interference minimized by coil design and circuitry.
Built-in and resettable with current reading available on LCD panel.
Multiple channels permit several MT 5500s and other Garrett detectors to operate simultaneously in close proximity.
Ready light indicates unit is operational; alarm lights and audible alarms are activated when the target amount of metal is detected; location of alarm lights on left and right side of display combined with variable tone indicates which side of the person the target is located.
Dual-level access codes required to set or change all sensitivity settings and detection programs; one level for use by supervisors in selecting programs and sensitivity and the other for initial set-up and overall control; non-resettable sequence code logs all changes made whenever sensitivity codes are accessed. An audible alarm reports unauthorized attempts at access.
Improves analysis of detection signal; increases throughput; helps eliminate “false alarms” and also provides accurate traffic counter.
Solid state switches (low voltage AC or DC) for operating external alarms and control devices.
Programs designed to eliminate the problem of dissimilar targets canceling each other.
Attractive scratch and mar-resistant laminate with resilient end caps; control panel and cross members made of heavy duty aluminum.
The MT 5500 walk-through detector provides maximum throughput with exceptional scanning technology—locating metal targets on the left, right or center of its archway. The popular MT 5500 meets the demanding needs of security professionals worldwide who trust its ability to maintain patron flow rate with minimal alarms.